Inject printing machine IPM001

    Inject printing machine IPM001-FHARVEST- Injin Ciko, Injin Hatimi, Injin Capping, Injin Lakabi, Injin Lakabi, Wasu Injin, Layin Injin Maɗaukaki


    Tsarin Injin 

    2. Anti-tsangwama da babban kwanciyar hankali

    3. Nan take ƙara tawada / siraran siraran. Don tabbatar da cewa ba a tilasta wa abokin ciniki tawada don maye gurbin tawada ba saboda matsalar rayuwar harsashin tawada, don haka rage farashin kayan masarufi.

    4. Babu buƙatar samar da iska mai matsa lamba, yana rage ƙawancen tawada da sauran ƙarfi.

    5. Daga tsarin wutar lantarki zuwa tsarin ajiyar lantarki da tsarin aiki, da

    Tsarin inji

    Yawan layin bugu: 1-4 layukan bugu (na zaɓi)

    Halayen ayyuka

    Matrix digo na zaɓi: 5×5, 5×7, 6×9, 8×11, 12×16, 18×24, 24×32 bugu na rubutu

    Tsafin hali: na iya zaɓar tsakanin 2–10mm bisa ga matrix dot matrix

    Tambarin Abokin Ciniki/Tsarin: Tambarin mai amfani da ƙirar za a iya gyara ta kan layi kai tsaye akan firinta

    Gurin layi: har zuwa layukan coding 4, saurin layi guda har zuwa 165 m/min

    Mai bugawa: kwanan wata, lokaci, lambar tsari, motsi da tsari, da sauransu

    Tsarin bugawa: Mafi kyawun nisan bugu: 10mm Range: 5mm-15mm (nisa daga bututun ƙarfe zuwa abin da ake fesa)

    ƙarfin bayanin ajiya: 100

    Bumburi: dumama bututun ƙarfe Diamita: 35mm; Tsawon: 260mm

    Maƙogwaro: tsayin tsayi mai tsayi: 2.5m Diamita: 21mm radius lanƙwasawa: 150mm

    Throat: high toughness Length: 2.5m Diameter: 21mm Bending radius: 150mm